TPI Fan Forced Wall Heater, 1-Phase Standard, Series: 3310, 13648/6826 Btu, 208/240 VAC, 16.8/14.4/8.3/7.2 A, 4000/3000/2000/1500 W, 175 cfm, 600 rpm, 90°F, Wall Mount, Steel, Ivory, Powder Coated, 19-15/16 in H x 14-3/16 in W x 4 in D.
Features
- Powder coated 18 ga steel front
- Automatic reset thermal limit for safety
- Steel block fin element
- Units with dual wattage, factory wired to highest wattage
- Wattage selectable at time of installation on some models
- Furnish and install electric forced air heaters where specified
- The heaters shall be constructed of a heavy gauge steel housing
- The heaters shall have a low speed 600 rpm motor which drives a vane axial blower to deliver a quiet 175 cfm of down flow air
- The heating element shall be of the sealed block fin type with large, parallel steel fins for quick heat transfer
- Unit shall have a standard thermal overload cutoff for added safety, a fan switch for fan only operation
- The in-built thermostat shall be calibrated to provide a range of 0 to 110°F
