Simpson Strong-Tie® WA50100SS Wedge-All® Wedge Anchor, 1/2 in dia, 10 in OAL, 2 in L Thread, 303/304 SS

Simpson Strong-Tie® wedge anchor, series: Wedge-All®, 1/2 in dia, 10 in OAL, 2 in Thread Length, 303/304 Stainless Steel, 2-1/4 in Minimum Embedment Depth, 1/2 in Drill, 3/4 in Head, 6560 lb Shear Strength, 740 lb Tensile. A non-bottom-bearing, wedge-style expansion anchor for use in solid concrete or grout-filled masonry. The Wedge-All® wedge anchor is available in carbon steel with zinc or mechanically galvanized coating, as well as Types 303/304 and Type 316 stainless steel. Threaded studs are set by tightening the nut to the specified torque. The Wedge-All is code listed for grout-filled masonry applications.

Features

• Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
• One-piece, wrap-around clip ensures uniform holding capacity
• Threaded end is chamfered for ease of starting nut
• 18-8 stainless steel nut/washer/clip
• The minimum concrete thickness is 1-1/2 times the embedment depth
• The allowable loads are based on a safety factor of 4
• 9/16 in minimum fixture hole
• 60 ft-lb installation torque
• 6560 ultimate and 1345 lb allowable shear strength
• 740 lb at 2000 psi and 1190 lb at 4000 psi allowable tension load