PHD C-Clamp, series: FIG 250 Series, 3/8 in Rod, 400 lb, For Use With: 4 in Pipe, Carbon Steel, Electro-Galvanized. Designed For Attaching Hanger Rod to The Bottom Flange of a Beam. The Hanger Rod Should Make Contact with The Beam Flange to Ensure Full Engagement.
Features
- Low carbon steel with hardened steel cup point set screw
- When a torque wrench is unavailable, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added
- Underwriters laboratories listed in the US (UL)
- Caution should be taken not to over tighten the set screw
- 3/8 to 7/8 in set screws
- 60 in-lb torque set screw
