# Dixon® RDM21 Hose Mender, 1-1/2 in, Hose Shank, 316 Stainless Steel

**Brand:** [DIXON](https://maxsupplyco.com/brands/DIXON)
**SKU:** RDM21-10639
**MPN:** RDM21
**Price:** $51.04 · in stock
**URL:** https://maxsupplyco.com/product/dixon-rdm21

## Features

- Mender for connecting two hoses of the same diameter in a straight run
- Hose barbs on both ends
- 316 stainless steel for higher strength and greater corrosion resistance than 304 stainless steel
- Barbed fitting for a tight seal on hoses
- For use with a hose clamps or crimp sleeve or ferrule
- Menders are not for compressible products such as air, nitrogen or steam
- The working pressure may vary with the construction of the hose, the type of clamping system used and the application
- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement
- Air compressors, automatic manufacturing operations, aircraft controls and tire installation in industries

## Specifications

| Spec | Value |
|---|---|
| Brands | DIXON |
| Diameter | 1-1/2 in |
| Material | 316 Stainless Steel |
| Warnings | This product contains a chemical known to the State of California to cause birth defects or other reproductive harmDo not use in connection with drinking waterWash hands after handling |
| Warranty | Limited |
| Height (in) | 1.5 |
| Length (in) | 4 |
| Manufacturer | Dixon Valve & Coupling |
| Nominal Size | 1-1/2 in |
| Package Quantity | 1/Each |
| Fitting/Connector Type | Coupling |
| Manufacturer Part Number | RDM21 |

## Description

Dixon® Hose Mender, Fitting/Connector Type: Coupling, 1-1/2 in Nominal, Hose Shank End Style, 4 in Length, 316 Stainless Steel, 1-1/2 in dia

Features

- Mender for connecting two hoses of the same diameter in a straight run

- Hose barbs on both ends

- 316 stainless steel for higher strength and greater corrosion resistance than 304 stainless steel

- Barbed fitting for a tight seal on hoses

- For use with a hose clamps or crimp sleeve or ferrule

- Menders are not for compressible products such as air, nitrogen or steam

- The working pressure may vary with the construction of the hose, the type of clamping system used and the application

- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement

- Air compressors, automatic manufacturing operations, aircraft controls and tire installation in industries