Dixon® cam and groove notched coupler, type-C, series: Boss-Lock™, coupling fitting/connector, 2 in nominal, female coupler x hose shank end style, 5-5/16 in length, 250 psi pressure, 316 stainless steel, domestic.
Features
- 8-3/16 in open across cam arm
- The largest advantages of the notched design is that the coupling can be removed from a damaged hose by cutting away the ferrule, without necessarily damaging the fitting
- After inspection of the fitting to determine its suitability for reuse, it can be reinstalled into another hose by using a new ferrule
- Supplied with pull ring safety clips
- Produced to interchange with all product produced to commercial item description A-A-59326D
- For use with notched ferrules
- Under no circumstances should cam and groove couplings be used for compressed air or steam service!
- Dixon stems and ferrules are specifically designed to be used together as a coupling system
- Due to differences in dimensions and tolerances for safety reasons, do not use other manufacturer's stems or ferrules with Dixon products
- Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F with a standard Buna-N seal installed
- Contact Dixon for swage or crimp recommendations
- You must purchase a fitting and the matching ferrule to create an assembly
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
