Dixon® Ground Joint Spud, series: Boss™, Spud, 1/2 in Nominal, MNPT, 1-5/16 in Hex, Steel, Plated, 1-7/8 in L, Domestic.
Features
- The spud part of the coupling serves as one half of the boss ground joint connection and is usually fixed to the equipment
- The stem part that is clamped to the hose is the other half
- The two halves are connected or disconnected by rotating the wing nut on the spud, when connected they achieve both a mechanical and a pressure seal
- Easy to seal
- Boss couplings supply a convenient threaded fitting to connect two lengths of hose, or a single length to a male or female threaded outlet
- Positive metal-to-polymer seal
- Use with boss ground joint fittings
- Leakproof seal forms when the metal head of the stem makes contact with the patented polymer seat in the spud
- The non-metallic polymer seat resists most chemicals found in manufacturing facilities
- Recommended for steam service up to 450°F
- Worn-out hose couplings can be dangerous
- They should be checked regularly and replace when necessary
- Each coupling user should review applications and add safety devices where indicated
- Note: pressurized steam is an extremely dangerous commodity
- Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! never use an unapproved item for steam service
- Always follow the manufacturer's product recommendations for pressurized steam handling
- Boss couplings are all-purpose hose couplings, universally recommended for steam hose connections
- They are also widely used for air, water, fluid petroleum, chemicals and liquid petroleum gas up to 1 in ID
- Boss couplings can be applied to many types of rubber, synthetic, plastic, metallic or semi-metallic hose
