Dixon® Ground Joint Washer Seal Spud, Series: Boss™, Fitting/Connector Type: Spud, 3/8 in Nominal Size, Thread Wing Nut x FNPT, Steel, Plated, Domestic
Features
- The spud part of the coupling serves as one half of the connection and is usually fixed to the equipment
- The stem part that is clamped to the hose is the other half
- The two halves are connected or disconnected by rotating the wing nut on the spud, when connected they achieve both a mechanical and a pressure seal
- Easy to seal
- Boss couplings supply a convenient threaded fitting to connect two lengths of hose, or a single length to a male or female threaded outlet
- Use with boss washer seal fittings
- A Klingersil® C-4401 washer is inserted between the stem and spud
- Recommended for steam service up to 450°F
- Worn-out hose couplings can be dangerous
- They should be checked regularly and replace when necessary
- Each coupling user should review applications and add safety devices where indicated
- Note: pressurized steam is an extremely dangerous commodity
- Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! never use an unapproved item for steam service
- Always follow the manufacturer's product recommendations for pressurized steam handling
- Boss couplings are all-purpose hose couplings, universally recommended for steam hose connections
- They are also widely used for air, water, fluid petroleum, chemicals and liquid petroleum gas up to 1 in ID
- Boss couplings can be applied to many types of rubber, synthetic, plastic, metallic or semi-metallic hose
