# Dixon® B35 Boss™ 4-Bolt Clamp, 3 in ID x 3-52/64 to 4-4/64 in OD, 5-1/16 in L, 6-11/16 in W, 150 ft-lb

**Brand:** [DIXON](https://maxsupplyco.com/brands/DIXON)
**SKU:** B35-10639
**MPN:** B35
**Price:** $78.21 · in stock
**URL:** https://maxsupplyco.com/product/dixon-b35

## Features

- Recommended for steam service up to 450°F
- Replacement nuts and bolts are available
- Two gripping fingers and two clamps sections
- The bolts used in the boss interlocking clamps are not standard bolts
- They vary from standard bolts in their lengths, diameter, overall thread lengths and materials hardness
- These bolts can be retorqued, but it is not recommended to reuse the bolts or clamps, as they are designed for a single bend only
- Torque values for clamps are based on dry bolts
- The use of lubricant on bolts will adversely effect clamps performance
- Do not lubricate nuts and bolts
- Bolts in boss clamps are designed to bend as they are tightened and this allows the clamps to conform to the hose outside diameter
- Always tighten bolts to their specified torque values
- Periodic re-tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses
- Boss clamps are for single use only, once removed they are to be discarded
- Warning: this products contains a chemicals known to the State of California to caused birth defects or other reproductive harm
- Do not use in connections with drinking water
- Wash hands after handling

## Specifications

| Spec | Value |
|---|---|
| Brands | DIXON |
| Finish | Zinc Plated |
| Width (in) | 6.687 |
| Length (in) | 5.062 |
| Manufacturer | Dixon Valve & Coupling |
| Inside Diameter | 3 in |
| Package Quantity | 1/Each |
| Manufacturer Part Number | B35 |
| Maximum Operating Torque | 150 ft-lb |

## Description

Dixon® 4-bolt clamp, series: Boss™, 3 in inside dia, 3-52/64 to 4-4/64 in outside dia, 5-1/16 in length, 6-11/16 in width, 150 ft-lb, iron band, zinc plated.

Features

- Recommended for steam service up to 450°F

- Replacement nuts and bolts are available

- Two gripping fingers and two clamps sections

- The bolts used in the boss interlocking clamps are not standard bolts

- They vary from standard bolts in their lengths, diameter, overall thread lengths and materials hardness

- These bolts can be retorqued, but it is not recommended to reuse the bolts or clamps, as they are designed for a single bend only

- Torque values for clamps are based on dry bolts

- The use of lubricant on bolts will adversely effect clamps performance

- Do not lubricate nuts and bolts

- Bolts in boss clamps are designed to bend as they are tightened and this allows the clamps to conform to the hose outside diameter

- Always tighten bolts to their specified torque values

- Periodic re-tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses

- Boss clamps are for single use only, once removed they are to be discarded

- Warning: this products contains a chemicals known to the State of California to caused birth defects or other reproductive harm

- Do not use in connections with drinking water

- Wash hands after handling