DeWALT® wedge anchor, expansion, series: SD1, 3/4 in dia, 4-1/4 in OAL, 1-3/4 in thread L, carbon steel, zinc plated, 3-3/8 in minimum embedment depth, 3/4 in drill, 3/4-10 thread, threaded stud head, UNC thread, 1/8 in maximum work thickness, 12,580 lb shear strength, 9,075 lb tensile strength.
Features
- Consistent performance in high and low strength concrete
- Ultimate load capacity 8,850 lb shear strength when embedded in 1,500 psi, 9,375 lb shear strength when embedded in 2,000 psi at 12 in minimum edge/end distance and 10,200 lb shear strength when embedded in 1,500 psi, 10,800 lb shear strength when embedded in 2,000 psi at 20 in minimum edge/end distance grout-filled concrete masonry wall faces
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5,440 lb
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- Ultimate load capacity: 7,180 lb tensile strength when embedded in 2,500 psi, 7,860 lb tensile strength when embedded in 3,000 psi and 9,075 lb tensile strength when embedded in 4,000 psi compressive strength concrete
